Virtual Garwolin – How are the latest industrial technologies affecting home installation solutions?

You can read this article in 2-3 minutes.

Industry demands are said to exceed those of home users – at least when it comes to some technical solutions. This is true to some extent, but the cheaper the solutions known for professional applications become, the greater the scope for their home use. Here are some simple examples.

How are valves selected for domestic installations?

The main domestic installations are the water installations. To date, of course, they mainly work with classic mechanical valves with levers or buttons. However, in fact, the solenoid valve in domestic installations is also appearing more and more often, mainly in combination with electronic control systems, whether in basin taps or shower panels. While in industry the main advantage of solenoid valves was durability and reliability (this is why some of them can work, for example, as a safety valve in systems), comfort considerations prevail at the home, although trouble-free operation is a big advantage. A wide selection of valves can be found on the website https://www.saga.info.pl/zawory/. Valves, however, are not the only example of industry transitioning to domestic applications.

Do domestic facilities prevent the use of modern ideas?

Most of the technologies, to be used in appliances or domestic installations, must be miniaturized and it is not necessarily a question of dimensions, but of possibilities. Not all of these devices are always clearly visible, a good example of which are industrial pumps, which gave rise, for example, to submersible pumps installed in wells. It is even more difficult to recognize the industrial origin, for example, of the compressors installed in heat pumps, and which would not achieve such efficiency, if it were not for the fact that they were derived from much more powerful devices. , which had to be particularly well developed, taking into account the needs of industry. As the technology became cheaper and more accessible, it was possible to think about how to apply it on a smaller scale as well. When it comes to pumps, it’s probably impossible to find a better example of technology transfer than air conditioning pumps: domestics are simply industrial mini-bins. It was not even necessary to modify the technology here.

A different approach to facility design

Valves or pumps are specific devices that have been used in domestic installations, although they were developed with industrial use in mind. Sometimes, however, it is something else, for example design ideas – not the whole valve, but the shape and arrangement of the flaps, or the materials. This last aspect is particularly important because today, domestic and industrial fittings often differ in dimensions and design details, but the materials are increasingly often the same. For example, who has recently seen a Zamak valve in a store? This is no longer done. In the same way, certain design ideas are introduced which, for example, have an impact on a marginal improvement of the water flow in the domestic installation, since they minimize the deposition of scale. Does it matter? Well – you can create beautiful fittings or valves without such changes, but as the technology has become cheap and mainstream, you can also create top-class equipment, which is largely modeled, if not on ready-to-use industrial solutions. employment, at least on certain ideas.

Changes in domestic facilities

If you look at home appliances, their story could be derived from some industrial solutions in almost any case. The fact that it is most obvious in the case of installations – whether water or electricity, or even gas today – does not mean that similar cases could not be identified in almost -all industries. Therefore, changes in the industry should also be considered by those interested in technological advancement in household appliances, appliances and installations.

Leave a Comment